GAMMA MECCANICA 125 mm.Tandem System for heavily printed or contaminated or high humidity materials

GAMMAMECCANICA TANDEM SYSTEM 125 mm.

Throughput rate up to 600-950 kg/h ca, depending on material and feeding rate (0,30-0,40 Kwh/kg)

This is an extrusion line suitable to handle heavily printed or contaminated or high humidity film and rigid plastics

Including

Loading conveyor belt

tunnel metal detector

automatic compactor

N.2 Dosing unit for masterbatches and more

1st extruder with 125 mm. screw Ø 22 L/D

1st degassing point

FIMIC RAS aumatic screenchanger

control cabimet

2nd extruder with 125 mm. screw Ø 22 L/D

2nd degassing point

BD-PLAST non-stop screenchanger

TDA6 GM water ring pelletizer

heat exchanging unit

vibrating screen

blower

Water treatment unit , mechanical type, with non woven filtering

Electric cabinet sfor complete management of the line

The line is in excellent conditions wirth very few worked hours

Can be tested in Italy on appointment

Constructor's description:

The TANDEM technology applied to the recycling of heavily printed, contaminated and high humidity plastic materials guarantees the excellent quality of the granule with notable energy savings in comparison with conventional recycling systems that foresee the re-extrusion of the material.

The plant is composed of a COMPAC unit and two extruders arranged in succession.

The short, non-vented primary extruder and the larger diameter secondary extruder allow for a reduction of the cutting forces (“shear rate”) and stress less the melted material.

Distinctive characteristics:

– Line suitable for the recycling for heavily printed, high humidity and contaminated materials.

– High performance degassing chamber for removal of up to 10 times more gas and humidity in the melted material compared to other systems.

– Possibility to have double filtration.

– Possibility to have the first extruder as a single screw and the second a twin screw.