By subscribing to our newsletter via our website www.germanplast.com, you will receive an update on some of the pre-owned machines available for reconditioning.

Sometimes our emails might end up in your spam box, by a curious set of inefficient parameters that some systems use to protect us from real spam. You might have noticed that, recently, even some messages sent from your historical connections end up in the spam box...until you correctly configure your email programme by creating a filter that ensures these messages are "never sent to spam"

• If you have subscribed to our newsletter, please check that our email address info@germanplast.com is not marked as spam or suspicious message. You will receive our updates twice a month.
• If you are not yet subscribed, you can do so by clicking on the yellow button at the top right of our website and please check that our emails do not end up in your junk mail folder.

Some of our stock availability:

SIZE REDUCTION

1. VECOPLAN VAZ 2500 M NF-T, motor 247 kw Hi Torque, 76 cutting crowns 60x60 mm, offered completely reconditioned, delivery 6 weeks from confirmation
2. WEIMA SINGLE SHAFT SHREDDER, 1500 mm 90 kw, 700 worked hours, year 2017, offered totally reconditioned, 5 weeks from confirmation
3. WANNER GRANULATOR D25 38S - 7,5 kw, year 2010, immediately available, offered reconditioned

EXTRUSION

1. OMP PREALPINA 180 mm. 35 L/D, 1.000-1.400 kg/h, with NEW screw+barrel and NEW cabinet, offered totally reconditioned. Possible replacement with a.c.drive+inverter, possible addition of PLC, fully automatic screenchanger, etc.
2. LEDA EXTRUDER 160 mm 50 LD 2 degassing pumps, ENERGY SAVING IR heaters, 800-900 kg./h, offered reconditioned. This well-made extruder is extremely efficient thanks to its 2 degassing points and screw with a ratio of 50 L/D and Ø 160 mm. Petrelli's patented infrared heaters significantly reduce energy consumption, making this extruder an excellent solution for heterogeneous MFI, moist or heavily printed materials.
3. GAMMA MECCANICA EXTRUDER 160 AF low energy consumption, 1.000 kg/h for PE PP ABS PS PC, offered AS IS WHERE IS or partly reconditioned or TOTALLY RECONDITIONED
4. CDM PREALPINA 160 mm. with new ELECTRIC CABINET, SCREW, BARREL, feeding piece
5. CDM PREALPINA REGRANULATING LINE 130 mm., Capacity 500-600 kg/h, year 2013, offered totally reconditioned, READY TO GO (possibility fully-automatic screen changer FIMIC RAS 400)
6. PREALPINA EXTRUDER 130 mm. 35 L/D, 500-600 kg/h, 280 kw. d.c. drive (new 2019), checked for good working conditions READY TO GO
7. CDM PREALPINA USED EXTRUSION LINE 85 mm. 35 L/D, 240-320 kg/h, fully RECONDITIONED, Delivery: about 10 weeks from confirmation
8. TECNOVA EXTRUSION LINE 130 mm. screw diam.37 L/D, 500-600 kg/h, 225 kw a.c. drive, offered as is, checked, lightly reconditioned or totally reconditioned, depending on your budget.
9. PRT RECYCLING EXTRUDER 85 mm screw, 30 L/D, New cutting system and crammed feeder, general conditions as new, READY TO GO
10. PRT EXTRUDER 85 mm.35 LD, 200 kg/h, immediately available, as is where is.

SCREENCHANGERS

1. FIMIC RAS 400 fully automatic - 2007, offered reconditioned, immediately available
2. FIMIC RAS 325 SCRAPER fully automatic - 600 kg/h depending on material, year 2017, just disconnected, excellent conditions, immediately available
3. FIMIC RAS+REF 400 fully automatic - year 2017, totally checked in 2024 by constructor, immediately available
4. FIMIC RAS 325 BACKFLUSH fully automatic - offered totally reconditioned, with new control panel

This is just a selection of the machines ready to go. For more information, visit our website, our Youtube channel and contact us for any request!